Lucent Technologies CBX 500 - Whats New in this Guide

About This Guide
Beta Draft Confidential
xxiv4/5/03 CBX 500 Multiservice WAN Switch Hardware Installation Guide
What’s New in This Guide?
The following table lists the latest enhancements and changes to this guide.
Appendix B CBX 500 cables and pinout assignments.
Appendix C Country-specific regulatory information, including
recommended and mandatory requirements by certification
authorities; also environmental standards and compliance
information.
Appendix D Switch processor (SP) redundancy features.
Read To Learn About
General
Enhancement
See
Merged all hardware information from the
8-Port Subrate DS3 FR/IP I/O Module
User’s Guide into this Guide.
Appendix A
Merged all hardware information from the
32-Port Channelized T1/E1 FR/IP I/O
Module User’s Guide into this Guide.
Appendix A
Merged all hardware information from the
3-Port Channelized DS3/1 IMA I/O Module
User’s Guide into this Guide.
Appendix A
Added a note to indicate that air filters must
be vacuumed or replaced once a month to
prevent heat from building up inside the
chassis.
page 6-36