EasyManua.ls Logo

Lucent Technologies CBX 500 - DS1 Standards; Physical Interfaces; Line Coding; Signal Levels

Lucent Technologies CBX 500
232 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IOP and IOA Module Specifications
3-port Channelized Inverse Multiplexing over ATM (IMA) Module
Beta Draft Confidential
CBX 500 Multiservice WAN Switch Hardware Installation Guide 4/5/03A-47
DS1 Standards
• AT&T Publication 62411
• Bellcore TR-TSY-000312
• Bellcore TR-NWT-000499
• ANSI T1.403
• ANSI T1.107
• ANSI T1.231
• RFC 1406
Physical Interfaces
Three DS3 ports, conforming to relevant ANSI, Bellcore, and International
Telecommunication Union (ITU) specifications
Physical Connectors
Two 75-ohm BNC connectors for each port (transmit/receive)
Line Coding
B8ZS line coding
Signal Levels
• Receive: Peak pulse amplitude from 0.2 to 0.85 volts
• Transmit: Conformance to ANSI T1.102 pulse template and amplitude
(0.36 volts to 0.85 volts) for cable lengths up to 450 feet
Clocking Options
• Loop timing
• Internal timing (better than Stratum 4 - +/- 20 PPM [part per million])
• External timing via 1.544 MHz T1 source

Table of Contents