EasyManua.ls Logo

Lucent Technologies CBX 500 - Page 31

Lucent Technologies CBX 500
232 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Beta Draft Confidential
Overview
CBX 500 Features
CBX 500 Multiservice WAN Switch Hardware Installation Guide 4/5/031-3
• Protocol translation features
• Usage-based billing capability
• Congestion management based on Lucent’s VNN packet routing for large network
support, which includes:
– End-to-end delay
– Cell delay variation and cell loss ratio
– Administrative path control
– Virtual private networks (VPNs)
– Sophisticated support for point-to-multipoint connections
• Support for the four ATM service classes:
– Constant bit rate (CBR)
– Variable bit rate-real-time (VBR-RT)
– Variable bit rate-non-real time (VBR-NRT)
– Available bit rate/unspecified bit rate (ABR/UBR)
• ATM flow-control processing support enabling service providers to manage
traffic proportionately on a per-circuit basis (for ABR, UBR, and VBR-NRT
service classes) according to service agreements
• Ten quality-of-service (QoS) classes implemented via hardware buffers
(one CBR, four VBR-RT, four VBR-NRT, and one ABR/UBR)
• SVC support for UNI 3.0, UNI 3.1, and IISP interfaces
• Addressing support for E.164, network service access point (NSAP), data country
code (DCC) ATM end-system addresses, and international code designator (ICD)
ATM end-system addresses
• Encapsulated forward congestion indicator (EFCI) marking and discard
• Interim Link Management Interface (ILMI) and address registration on each port
• Three system-timing modes: recovered, external, or internal
• Four transmit timing and synchronization modes: loop, recovered, external, or
internal

Table of Contents