14
Using the Softkeys to Activate a Feature
Your display and softkeys allow you to access up to 15 switch-related features. For
example, you may want to use the Priority Calling feature to call another extension
with a distinctive 3-burst ring. You can activate this feature with the softkeys in the
following way:
To access a feature with
the softkeys (Priority
Calling is used in this
example)
1 Press
• The display shows the initial feature option
screen:
2 Press
• The display shows:
Menu
LWC CnLWC Cnslt AutCB Timer
Next
CFrwd CPark Excl TmDay PCall
3 To use the Priority Calling feature, press the softkey
below PCall and then dial the extension.
Note: When the feature is activated, after the
display screen shows you the digits you are dialing,
an arrow appears above the feature, as in the
example below. If there is not an arrow above the
feature, the feature is off.
When both parties hang up from the call, the arrow
above PCall (showing feature status indication)
disappears.
CFrwd CPark Excl TmDay PCall
To Next Page
Loading...
Need help?
General
