Lucent Technologies Definity 8434DX User Manual

27
To dial a call to a member
of your Dial Intercom
group
1 While off-hook, press [dial tone]
2 Dial the group member’s 1- or 2-digit code
[ringback tone]
• Intercom ring is sent
To answer any intercom
call
1 Pick up the handset and press
• You are connected to the call
Note: If you are active on another call, first
press , then press the button next to the
flashing light.
Icom Dial xxx
Icom
Hold Icom
Last Number Dialed
To automatically redial
the last number you
dialed (extension, outside
number, or trunk/feature
access code)
1 While on-hook or off-hook, press
or Dial the Last Number Dialed access code
__________ (while off-hook)
• Number is automatically dialed (up to 20 digits)
Note: Available with DEFINITY Generic 2 and with
System 85 R2V4 and some R2V3 systems. Check
with your system manager to learn if the feature is
available on your system.
Limitations on this feature should be noted. Digits
dialed via Abbreviated Dialing, feature dial codes,
authorization codes, and Station Message Detail
Recording (SMDR) account codes are not retained in
memory and must be redialed for each call.
To see the number you
last dialed (you must be
on-hook)
1 While on-hook, press
• Last number dialed is shown on the display screen
Last Dialed
Last Dialed

Lucent Technologies Definity 8434DX Specifications

General

Brand	Lucent Technologies
Model	Definity 8434DX
Category	Telephone
Language	English