Lucent Technologies Definity 8434DX User Manual

34
• The display shows:
(There are eight possible volume settings.
On the display, one arrow is the lowest setting, and
eight arrows is the highest setting.)
One full ring cycle will sound to demonstrate the
new volume.
Send All Calls
To send all incoming calls
(except priority, intercom,
and personal central office
calls) immediately to an
assigned extension,
AUDIX, or message
center for coverage
1 While on-hook or off-hook, press
or Pick up the handset and dial the Send All Calls
access code __________ [confirmation tone]
Note: You may hear a half ring as each call is sent
to coverage if you have a DEFINITY Generic 2 or a
System 85 R2V4.
RINGER L > > > > H
Send All Calls
To send an assigned
group of extensions
(except priority, intercom,
and personal central office
calls) immediately to an
assigned extension,
AUDIX, or message
center for coverage
1 While on-hook or off-hook, press
[confirmation tone]
To cancel Send All Calls
or SAC Group
1 While on-hook, press or
again
or Pick up the handset and dial the Send All Calls
cancel code __________ [confirmation tone]
• Your calls ring at your own voice terminal again
SAC Group
Send All Calls SAC Group

Lucent Technologies Definity 8434DX Specifications

General

Brand	Lucent Technologies
Model	Definity 8434DX
Category	Telephone
Language	English