Lucent Technologies Definity 8434DX User Manual

24
Call Pickup
To answer a call to a
member of your pickup
group when your voice
terminal is idle
1 While off-hook, press
or Dial the Call Pickup access code __________
(while off-hook)
• You are connected to the ringing call
To answer a call to your
pickup group while on
another call
1 Press
• Present call is put on hold
2 Press an idle call appearance [dial tone]
3 Press
or Dial the Call Pickup access code _______
• Called voice terminal stops ringing
• You are connected to the ringing call
Note: To return to the held call after completing the
present call, press the call appearance button next to
the fluttering light.
Call Pickup
Hold
Call Pickup
Conference
To add a third party to
a call
1 Press [dial tone]
• Present call is temporarily put on hold, and you
are given a new call appearance
2 Dial the number of the new party and wait for an
answer
Note: You can privately discuss the call with the
new party at this time; if there is no answer or the
line is busy, press the call appearance button next to
the fluttering light to return to the original party.
3 Press again
• All parties are now connected
To add a call you’ve put
on hold to another call
you’re connected to
1 Press [dial tone]
2 Press the call appearance button of the first call
3 Press again
• All parties are now connected
✔
Conf
Conf
Conf
Conf

Lucent Technologies Definity 8434DX Specifications

General

Brand	Lucent Technologies
Model	Definity 8434DX
Category	Telephone
Language	English