Lucent Technologies Definity 8434DX User Manual

35
Note: Your voice terminal is set for either the Speaker (listen-only) or the
Speakerphone (listen and talk) function. Check with your system manager to see if
you can use either of these two features.
In order for the other party to hear you, you must speak through the handset.
Use the following procedures if your voice terminal is set for the Speaker
(listen-only) feature.
Speaker
To place a call without
lifting the handset, or to
use speaker with any
listening-only feature
activity (such as,
monitoring a call on
which you have been put
on hold or for group
listening)
1 Press
• Red light next to goes on;
red light next to goes on
2 Place the call or access the selected feature
3 Adjust speaker volume if necessary
• To raise the volume, press the right half of the
Speaker Volume control button labeled ;
to lower the volume, press the left half of the
Speaker Volume control button labeled
Speaker
Speaker
Mute
• The display shows:
(There are eight possible volume settings. On the
display, one arrow is the lowest setting, and
eight arrows is the highest setting.)
To turn off the speaker
and return to the handset
1 Pick up the handset
• Red light next to and the red light next
to go off
• Speaker goes off
SPEAKER L > > > > H
Speaker
Mute

Lucent Technologies Definity 8434DX Specifications

General

Brand	Lucent Technologies
Model	Definity 8434DX
Category	Telephone
Language	English