Lucent Technologies Definity 8434DX - Select Ring (and Ringer Volume)

To Next Page

To Previous Page

Select Ring (and Ringer Volume)

To select a personalized

ringing pattern (for those

8434DX voice terminals

which have a

button)

Note: For procedures on

selecting a personalized

ringing pattern for those

8434DX voice terminals

that have a button,

see the next page.

1 Press

• Red light next to goes on steadily

2 Press

• Red light next to winks

• Current ringing pattern plays and repeats every

three seconds. The display shows the ringing

pattern you are hearing:

3 Continue to press (and then release) (or press

or ) to cycle through all eight ringing

patterns

✔

Shift

Ring

Shift

Hold

Shift

SELECT RING PATTERN: 1

Hold

4 When you hear the desired ringing pattern,

press again

• You hear confirmation tone (two rising tones)

• Your new ringing pattern is set

• Red light next to goes off

Note: If you receive a call, go off-hook, or lose power

during selection, the process is interrupted and you

must start again.

Shift

Other manuals for Lucent Technologies Definity 8434DX