Lucent Technologies Definity 8434DX User Manual

31
When you first power up the voice terminal, the following display appears.
To reset the speakerphone
(when the voice terminal
is first powered up)
1 Press the softkey below Begin to reset the
speakerphone
(Press the softkey below Cancel if you do not want to
reset the speakerphone at this time. However, note
that the red light next to will continue to
flutter.)
• If you press the softkey below Begin, the display
shows the following timed screen:
• You will hear a set of rising tones as the
speakerphone adjusts itself to the surrounding
acoustical environment. These tones are
automatic. No user response is required.
PLEASE RESET SPKR.
Begin Cancel
Speaker
OPTIMIZING PERFORMANCE
OF THE SPEAKERPHONE.
To adjust the
speakerphone to the
surrounding room
acoustics
1 While on-hook, press
• Red light next to goes on steadily
2 Press
• Red light next to goes off
• Red light next to flutters intermittently
• You hear a series of tones as the speakerphone
performs an acoustic test of the environment.
The display shows:
When the tones stop, your built-in speakerphone
is ready for use.
Shift
Shift
Speaker
Shift
Speaker
OPTIMIZING PERFORMANCE
OF THE SPEAKERPHONE.

Lucent Technologies Definity 8434DX Specifications

General

Brand	Lucent Technologies
Model	Definity 8434DX
Category	Telephone
Language	English