Lucent Technologies Definity 8434DX User Manual

18
To program an
Abbreviated Dialing (AD)
button
1 While off-hook, press and then press the
softkey below Prog
or Press (while off-hook)
or Dial the Abbreviated Dialing Program
access code __________ (while off-hook)
[confirmation tone]
2 Press the selected
3 Dial the outside number, extension, or feature access
code you want to store
Note: You may also be able to use the softkeys to
add special functions such as Pause, Mark, or Wait
into the telephone numbers programmed on the
AD button.
4 Press again [confirmation tone]
5 Hang up or press to end programming
To see the number stored
on an Abbreviated Dialing
(AD) button
1 While on-hook, press the selected
• Stored number is shown
2 Press to return to the normal display or repeat
Step 1 to see another number
Menu
Program
AD xxxxx
AD xxxxx
Drop
AD xxxxx
Exit
To place a call using an
Abbreviated Dialing (AD)
button
1 While off-hook, press the selected
• Call is automatically dialed [ringback tone]
Automatic Callback
To automatically place
another call to an
extension that was
frequently busy
1 Press and then press the softkey below
AutCB before or during call attempt
or Press before or during the call
attempt [dial or confirmation tone].
or Dial the Automatic Callback access code before
the call attempt __________ [dial tone]
2 Hang up (within seven seconds) or press
• You will get a 3-burst priority ring when both your
voice terminal and the called extension are idle
AD xxxxx
Menu
Auto Callback
Drop

Lucent Technologies Definity 8434DX Specifications

General

Brand	Lucent Technologies
Model	Definity 8434DX
Category	Telephone
Language	English