17
5 Dial the outside number, extension, or feature access
code you want to store
Note: You may also be able to use the softkeys to
add special functions such as Pause, Mark,
Suppress, or Wait into the programmed telephone
numbers.
6 Press
or Press
[confirmation tone]
• Number is stored
• Repeat Steps 3 through 6 if you want to program
additional items on the same list
7 Hang up or press to end programming
• If you want to continue programming, begin again
at Step 1 to program another personal list
Note: Record your personal list items on the
Abbreviated Dialing list in the back of this guide;
group and system lists are available from the
controller of the list or from your system manager.
Personal List
#
Drop
To place a call using a
personal, group, or
system list
1 While off-hook, press or or
or Dial the appropriate Abbreviated Dialing list code
(while off-hook)
• Personal __________ [dial tone]
• Group __________ [dial tone]
• System __________ [dial tone]
2 Dial the desired list item (1, 2, 3..., 01, 02...)
• Stored number is automatically dialed
Personal List Group List
System List
To Next Page
Loading...
Need help?
General
