Lukhan LK-T21 - Lf; Cr; Ff

To Next Page

To Previous Page

LK-T21 Technical Manual

[Name] Print and line feed

[Format] ASCII LF

Hex 0A

Decimal 10

[Description] ·Prints the data in the print buffer and feeds one line based on the current

line spacing.

[Details] ·This command sets the print position to the beginning of the line.

[Reference] ESC 2, ESC 3

[Name] Print and carriage return.

[Format] ASCII CR

Hex 0D

Decimal 13

[Description] When automatic line feed is enabled, this command functions the same as LF; when automatic

line feed is disabled, this command is ignored.

[Details] ·Sets the print starting position to the beginning of the line.

·The automatic line feed is ignored.

[Reference] LF

[Name] Print and return to standard mode in page mode.

[Format] ASCII FF

Hex 0C

Decimal 12

[Description] Prints the data in the print buffer and returns to standard mode.

[Details] ·The buffer data is deleted after being printed.

·The printing area set by ESC W is reset to the default setting.

·The printer does not execute paper cutting.

·This command sets the print position to the beginning of the line.

·This command is enabled only in page mode.

[Reference] ESC FF, ESC L, ESC S