Lukhan LK-T21 - Character Specifications; Auto Cutter and Paper Supply

LK-T21 Technical Manual
1) Number of characters: Alphanumeric characters: 95
Extended graphics 128 × 7 pages
(including one space page)
International characters: 32
① English
② Hangul
③ Chinese (GB2312,Big5)
④ Kanji
2) Character structure: Font A: 12 24ⅹ
Font B: 9 24ⅹ
Hangul, Chinese: 24 24ⅹ
Font A is selected as the default
3) Character size:
EPSON Emulation STAR Emulation
Dot density
0.141
ⅹ0.141mm/dot
(180*180dpi)
0.125ⅹ0.141mm/dots
(203*180dpi)
[dpi: dots per 25.4mm{1
"}]
3)Printing direction Unidirectional With friction feed
4)Paper width
82.5mm
(3.25")
80mm
(3.15")
60mm
(2.36")
58mm
(2.28")
82.5mm
(3.25")
80mm
(3.15")
60mm
(2.36")
58mm
(2.28")
5)Maximum
printable area
72.2mm
(512dots)
72.2mm
(512dots)
54.1mm
(384dots)
50.8mm
(360 dots)
80mm
(640dots)
72mm
(576 dots)
54.5mm
(436 dots)
52.5mm
(420 dots)
6)Character / line
Font A (12 24)ⅹ 42 42 32 30 53 48 36 35
Font B (9 24)ⅹ 56 56 42 40 71 64 48 46
Kanji Font (24 24)ⅹ 21 21 16 15 26 24 18 17
1.3 Auto Cutter
Partial cut: Cutting with one point center uncut
NOTE: To prevent dot displacement, after cutting, paper must be fed
approximately 1mm(14/360 inches) or more before printing.
1.4 Paper Roll Supply Device
1) Supply method: Drop-in paper roll
4