LK-T21 Technical Manual
GS L nL nH
[Name] Set left margin
[Format] ASCII GS L nL nH
Hex 1D 4C nL nH
Decimal 29 76 nL nH
[Range] 0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
[Description] Sets the left margin using nL and nH.
·The left margin is set to [(nL + nH × 256) × (horizontal motion unit)] inches.
Printable area
Left margin Printing width
[Details] ·This command is effective only of the beginning of a line.
·If this command is input in page made, the printer performs only internal flag operations.
·This command does not affect printing in page made.
·If the setting exceeds the printable area, the maximum value of the printable area is used.
·The horizontal and vertical motion units are specified by GS P. Changing the horizontal or
vertical motion unit does not affect the current left margin.
·The horizontal motion unit (x) is used for calculating the left margin. The
calculated result is truncated to the minimum value of the mechanical
pitch.
[Default] nL = 0, nH = 0
[Reference] GS W, GS P
63
To Next Page
Loading...