Lumel P30U series - Page 34

35
35
Settings
Archive
Parameter
symbol
Description Range of changes
Arch.Val
Selection of archived
values
Note: changing the re-
gister value clears the
archive in the internal me-
mory!!!
DisplVal
onlydisplayedvalue
+2nd Val
displayed value and
the second displayed
value
+Queried
displayed value,
seconddisplayedvalue
and all queried values
usingRS-485interface
Param.Ar
Typeofinputvaluewhich
controls conditional
archiving
DisplVal
displayedvalue
Time
time
+2nd Val
seconddisplayedvalue
Ar. Mode
Archiving triggering
condition  fig. 25 shows
a visualization of con-
dition types triggering
archiving (similarly to
alarmtypes).
n-on
normal (change from
0to1)
n-off
 normal (change from
1to0)
on
switchedon
off
switchedoff
h
-
on
manual, switched on;
untilthearchivingtype
is changed, the archi-
ving remains perma-
nentlyswitchedon
h
-
off
manual, switched off;
until the archiving type
is changed, the archi-
ving remains perma-
nentlyswitchedoff
OverLoAr
Archivelowerthreshold
-99999...99999
OverHiAr
Archiveupperthreshold
-99999...99999
Ar. Time
Archivingperiod(s)
1...3600
Table7