Lumel P30U series - Page 35

36
36
Table8
Settings
Ethernet (option,onlyvariantP30U-X2XXXXXX)
Parameter
symbol
Description Range of changes
DHCP
Switching DHCP client
on/off(enablesautomatic
transducer configura-
tion  which is connected
to a network so it can
communicate on that
networkusingtheInternet
ProtocolIP)
Off
DHCP switched off
– manually configure
transducer’sIPaddress
andsubnetmask;
On
DHCP switched on,
after powering on or
selecting from menu
option ReInitEt the
transducer will recei-
ve IP address, subnet
maskandgatewayad-
dress from the DHCP
server, the gateway
addresswillbethead-
dressoftheserverthat
assigned parameters
tothetransducer;
Ar.Erase
Erasinginternalarchive
Yes
Start erasing internal
archive
No
Withoutchanges
Rec.ToSD
Copy internal archive
intoSD/SDHCcard(va-
riant P30U-X1XXXXXX)
or into internal file sy-
stem memory  (variant
P30U-X2XXXXXX)
Yes
Start copying
thearchive
No
Withoutchanges
Param.SD
Percent of internal ar-
chiveuse which triggers
automatic copying to
SD/SDHCcard
5 … 95