LXNAV PowerMouse - Default Chapter; Table of Contents

Rev #35 March 2024
Page 2 of 43
1 Important Notices and safety information 4
1.1 Limited Warranty 4
1.2 Disposal of Old Electrical & Electronic Equipment 5
1.2.1 Disposal of waste batteries 5
1.3 Declaration of Conformity 6
1.3.1 FCC 6
1.3.2 CE 7
2 General overview 9
3 Packing Lists 10
4 Basics 11
4.1 LXNAV PowerMouse and PowerMouse+ at a Glance 11
4.1.1 PowerMouse comparison table 12
4.1.2 LXNAV PowerMouse and PowerMouse+ Features 12
4.1.3 Interfaces 12
4.1.4 Flarm antenna color coding 14
4.1.5 Options 14
4.1.6 Technical Data 14
4.1.6.1 Environmental limitations 14
4.2 ADS-B module 15
5 System Description 16
5.1 Switching on the Unit 16
5.2 Normal operation 16
5.3 Bluetooth 16
5.4 Wi-Fi and Bluetooth (PowerMouse+) 16
6 Installation 17
6.1 Connecting LXNAV PowerMouse/PowerMouse+ 17
6.2 Connecting Antennas 17
6.3 USB port 18
6.4 Wiring 18
6.4.1 PowerMouse PORT1 and PORT2 pinout (RJ45) 18
6.4.2 PowerMouse RF connector side description 18
6.4.3 Installation examples 19
6.4.3.1 PowerMouse/PowerMouse+ – FlarmView 19
6.4.3.2 PowerMouse/PowerMouse+ – FlarmLED 20
6.4.3.3 PowerMouse/PowerMouse+ – FlarmLED – Oudie 20
6.4.3.4 PowerMouse/PowerMouse+ – FlarmView – Sxxx Vario 21
6.4.3.5 PowerMouse/PowerMouse+ – LX9xxx – FlarmView 21
7 Data transfer 22
7.1 Firmware Update 22
7.1.1 Firmware update via USB port (USB stick) 22
7.1.2 ADS-B firmware update via Flash Loader 22
7.1.3 ADS-B firmware update via LXxxxx 23
7.2 Installing a new license 23
7.3 Configuring PowerMouse/PowerMouse+ 24
7.3.1 Configuring PowerMouse+ via Wi-Fi 24
7.3.1.1 Flight declaration screen 24
7.3.1.2 Flarm settings screen 25
7.3.1.3 Pull down menu 26
7.3.2 Configuring PowerMouse settings with PowerFLARM config 32
7.3.3 PowerMouse configuration by using Flarm configuration tool 33
7.4 OGN registration 36