Lynx Forest Fox User Manual

11
ENGLISH
Multi-display
Note! Multi-display instrument is found in following models as standard: Yeti V-1300 and
Yeti 600 SDI.
Operation
When the vehicle is powered up will the multi-display run a short start up test of two
second by illuminating all segments of the display. At the end of the test the vertical lines
(3.) in the upper part of the display will indicate the fuel level while the clock will show up on
the main display.
At this moment it is possible to select the various functions of the instrument with the
MODE and SET keys.
By pressing the MODE key, in each pressing you can select following functions: Timer,
Calendar, Using hours, Temperature °C or °F.
Clock and calendar operation
NOTE! Before the clock and the calendar is set must the vehicle be power up.
YEAR
 Power up the vehicle, press and keep the SET key pressed until the indication YE
shows up on the display which stands for YEAR (please note that you can enter the
programming phase only when the display shows date and clock). It is possible to
release the SET key at this moment and then go back pressing it again several times
to change the year, which has been set up in a cyclical way: 02, 03, 04
,..., 98, 99, 00, 01,
and so on; by keeping the key pressed down it changes faster.
MONTH
 Press the MODE key until the indication MO shows up on the display which stands
for
MONTH. It is possible to release the MODE key at this moment and then go back
pressing the SET key several times to change the month, which has been set up in a
cyclical way: 12, 11, 02
,...,11 and so on; by keeping the key pressed down it changes
faster.
DAY
 Press the MODE key until the indication dY shows up on the display which stands
for DAY. It is possible to release the MODE key at this moment and then go back
pressing the SET key
several times to change the day, which has been set up
in a cyclical way: 25, 26, 27,..., 31, 01, 02
and so on; by keeping the key pressed
down it changes faster.
HOUR
 Press the MODE key until the indication Ho shows up on the display which stands
for HOUR. It is possible to release the MODE key at this moment and then go back
pressing the SET key several times to change the hours, which have been set up in
cyclical way : 23,00, 01
,..., 21, 22, 23 and so on ; by keeping the key pressed down it
changes faster.
MINUTE
 Press the MODE key until the indication Mn shows up on the display which stands
for MINUTE. It is possible to release the MODE key at this moment and then go back
pressing the SET key several times to change the minutes , which have set up in a
cyclical way: 59, 00, 01
,..., 57, 58, 59 and so on; by keeping the key pressed down it
changes faster.
After this press the MODE key again and the multi-display is released from the program-
ming, the clock starts from 00 and memorizes the new data.

Lynx Forest Fox Specifications

General

Brand	Lynx
Model	Forest Fox
Category	Offroad Vehicle
Language	English