MADE IN ITALY
47
electric modular oven
6 CAP. 3 MD
TEMPERATURE °C
Set a temperature of about 25°C.
USe the relevant selector switch to start the ceiling and bed plate heating elements.
At this point, the chambers and the steam generator start heating up.
Increase gradually the furnace temperature by 25 °C every hour until reaching the temperatre of
90°C.
Keep this temperature for at least 3 hours.
Increase the temperature to 150 °C and keep it for one hour.
Increase further the temperature to 200 °C and keep it for another hour.
Observance of the operations described above (shown in the graph hereunder) are of
fundamental importance in order to ensure a correct operation of the cooking planes besides
allowing drying of the insulating material and the painted parts.
By means of the steam vacuum cleaner, expel the bad smells that would otherwise impregnate
the product during the first cooking.
Make sure of the proper functioning of the lights inside the chambers by turning on the related
selector.
At this point the furnace is ready for the cooking operations.
To Next Page
Loading...