MADE IN ITALY
48
electric modular oven
FIG.7
Make sure that all the terminals of the different electrical parts installed on the panel are
suitably tightened.
Make sure that all the heating element power supply cables are intact and firmly locked on the
heating element terminals.
Make sure that the electrical tests described in the relevant paragraph have been properly
done and that the technician filled and signed the proper form.
Fill the appropriate test form in all its parts and send it to the manufacturer.
Train the users on the correct use of the oven.
Prepare a few trays of dough to be baked.
Insert the product in the chamber and close the doors.
See the relevant chapter for all the instructions concerning the production cycle.
Perform a first baking cycle.
At the end of the cycle, check the uniformity of baking.
To Next Page
Loading...