MADE IN ITALY
52
electric modular oven
Any intervention on the electrical and electronic components of the machine must be
carried out only by qualified staff well trained in electrical parts functions and the
measures to follow in order to handle them avoiding personal injuries and injuring others.
Probable Causes
The aspiration of the steam exhauster is not sufficient
Insufficient humidification
Water leakage next to the humidifier
Hot fluid leakage from the close door
Replace the door protections
1) Some of the ceiling or bed plate heating elements are broken.
2) Blown heating element fuses
3) the temperature probe is incorrectly installed or broken
a) Identify the faulty heating elements and replace them
b) Replace any blown fuses
c) Reposition or replace the probe.
The resistances does not start
1) The electronic instrument is not working
2) The thermoregulator probe is not working
a) Replace the electronic instrument
b) Check the probe connections and replace, if necessary
Bread at the end of the baking cycle is matt and rough
1) Insufficient humidification
2) The bread is not wet during the humidification process and the dough must be reconsidered.
a) See previous paragraph on “humidification problems”
b) Check the dough
To Next Page
Loading...