CAB DISPLAY MODULE (CDM)
6. Press SELECT (D) until REEL SPEE D is displayed on
the upper line.
• ENABLED/L O C KED is displayed on the lower line.
7. Press left (B) arrow to enable REEL SPEED
control switch.
Press right (C) arrow to lock REEL SPEED
control switch.
8. Press PROGRAM (A) to exit Programming Mode, or
press SELECT (D) to p roceed to next WINDROWER
SETUP action.
Figure 4.2
00: M105 Reel Speed Control Lock
Figure
4.201: M155 Reel Speed Control Lock
Figure 4.202: M205 Reel Speed Control Lock
147962 240 Revision A
To Next Page
Loading...
