PRE-DELIVERY CHECKS
Form # 169080 Issue – April 2007
LUBRICATE THE HEADER (cont’d)
BELT TENSIONER PIVOT (1 PLC)
10% MOLY GREASE IS RECOMMENDED
FOR DRIVELINE SHAFT SLIP JOINT ONLY
DRIVELINE UNIVERSALS (4 PLCS)
DRIVELINE SHAFT (1 PLC)
High Temp. Extreme Pressure
(EP2) Performance With 1%
Max Molybdenum Disulphide
(NLGI Grade 2).Lithium Base
ROLL SHAFT BEARINGS (3 PLCS)
Oil should slightly run
out when removed.
To Next Page
