Form # 169080 Issue – April 2007
Stop engine and remove key from ignition
before leaving operator's seat for any reason. A
child or even a pet could engage an idling
machine.
Keep the area used for servicing machinery
clean and dry. Wet or
oily floors are slippery.
Wet spots can be
dangerous when
working with electrical
equipment. Be sure all
electrical outlets and
tools are properly
grounded.
Use adequate light for
the job at hand.
Keep machinery clean.
Do not allow oil or grease to accumulate on
service platforms, ladders or controls. Clean
machines before storage.
Never use gasoline, naphtha or any volatile
material for cleaning purposes. These materials
may be toxic and/or flammable.
When storing machinery, cover sharp or
extending components to prevent injury from
accidental contact.
To Next Page
Loading...
