UNLOADING AND ASSEMBLY
169561 17 Revision C
g. Remove bolt and washer securing pin to hitch.
CAUTION
Hold pin from falling to the ground when
bolt is removed.
h. Remove pin, and re-insert pin in hitch from top.
i. Remove shipping wire or banding securing
shipping blocks at front of hitch, and remove
blocks.
j. Remove banding from jack.
k. Remove pin (A) securing jack to hitch, and
remove jack from shipping position.
l. Install at jack location at front of hitch, and secure
with pin (A).
A
A
To Next Page
Loading...
