UNLOADING AND ASSEMBLY
169561 31 Revision C
STEP 19. FILL LIFT CYLINDERS
a. Open lift cylinder lock-out valve on both lift
cylinders.
DANGER
Never start or move the machine until you
are sure all bystanders have cleared the
area.
b. Start tractor.
c. Cycle the header lift cylinders five or six times
to maximum lift to fully charge the cylinders
and hydraulic lines.
d. Raise header to full height, stop tractor, and
remove key.
CAUTION
Stop engine, and remove key from ignition
before leaving Operator’s seat for any
reason. A child or even a pet could engage
an idling machine.
e. Close lock-out valve on both lift cylinders.
To Next Page
Loading...
