UNLOADING AND ASSEMBLY
169561 36 Revision C
STEP 22. INSTALL OPTIONS
Install the following optional kits which may have
been supplied with your header. Use the
instructions supplied with the kit or as specified
below:
A. TALL CROP DIVIDER KIT
a. Lower header to the ground, shut off engine,
and remove key from ignition.
b. Open cutterbar doors.
c. Install tall crop dividers in accordance with
instructions supplied with the kit.
B. SKID SHOES
a. Raise header fully, engage lift cylinder lock-out
valves, and shut off engine. Remove key from
ignition.
b. Install skid shoes in accordance with instructions
supplied with the kit.
C. HEADER DRIVE PERFORMANCE
KIT
a. Lower header to the ground, shut off engine, and
remove key from ignition.
b. Install performance kit in accordance with
instructions supplied.
To Next Page
Loading...
