SAFETY
169561 4 Revision C
Stop engine and remove key from ignition
before leaving Operator’s seat for any
reason. A child or even a pet could engage
an idling machine.
Keep the area used for servicing machinery
clean and dry. Wet or oily floors are
slippery. Wet spots can be dangerous when
working with electrical equipment. Be sure
all electrical outlets and tools are properly
grounded.
Use adequate light for the job at hand.
Keep machinery clean. Do NOT allow oil or
grease to accumulate on service platforms,
ladders or controls. Clean machines before
storage.
Never use gasoline, naphtha or any volatile
material for cleaning purposes. These
materials may be toxic and/or flammable.
When storing machinery, cover sharp or
extending components to prevent injury
from accidental contact.
To Next Page
Loading...
