Maeving | RM1S Owner’s Handbook
22
QUICK START GUIDE
Releasing the side stand
A safety cut-out sensor on the side stand
prohibits drive from being engaged while
the side stand is in the down position. The
side stand must be in the up position before
selecting 1, S, or E, using the driving mode
button (D), and riding o.
For further information, see Side stand on
page 48.
CAUTION: Sit astride the motorcycle
and take the motorcycle’s weight
before releasing the side stand to
avoid the motorcycle from becoming
unbalanced. An unstable motorcycle
may result in damage or personal
injury.
WARNING: Never ride with the side
stand in the down position, as this
could cause an accident, potentially
causing injury or death.
NOTICE: Do not remain seated on
the motorcycle for any length of
time before releasing the side stand.
Doing so could cause damage to the
side stand.
To Next Page
Loading...
