MAEVING RM1S 2024 - Front Headlight; Headlight Adjustment

93
FRONT HEADLIGHT
FRONT HEADLIGHT
WARNING: Make sure that you ride your motorcycle to suit
current visibility and weather conditions. Failure to do so
could result in loss of control and/or an accident.
WARNING: Make sure that the headlight beam is adjusted
suciently to illuminate the road surface ahead without
dazzling other road users. If the headlight is incorrectly
adjusted, it will impair visibility and may cause an accident,
resulting in injury or death.
WARNING: Never attempt to adjust the headlight whilst riding
the motorcycle. This may result in loss of control and an
accident, causing injury or death.
WARNING: Never cover the headlight lens, during operation,
with items such as: luggage, clothing, adhesive tape or products
intended to alter the headlight beam, or non-genuine lens
covers. Doing so will impair the headlight beam and may result
in loss of control and/or an accident, causing injury or death.
NOTICE: Never cover the headlight lens with anything
that may obstruct airflow to the lens, as this will prevent
heat escaping from the headlight, causing the headlight to
overheat and resulting in damage.
Damage caused to the headlight lens by overheating is not considered
a manufacturing fault and, therefore, will not be covered under the
warranty.
Note: The motorcycle uses LED lighting for all of the light
units fitted to the motorcycle, making all of the lights
maintenance-free.
Headlight adjustment
The headlight is manufactured as a sealed unit and can only be
adjusted by a Maeving Service Representative.
To adjust the headlight beam height, loosen the 2 screws securing the
headlight to the support bracket and set the headlight beam to the
required height.
Note: Tighten to
6 Nm6 Nm.
! ! !
! ! !
! ! !
! ! !
! ! !
! ! !
!