Maeving | RM1S Owner’s Handbook
64
MAINTENANCE AND ADJUSTMENT
Throttle control
Smooth throttle function is essential for yours and the motorcycle’s
safety. Make sure that the throttle control is operating normally. This
should be carried out during the daily checks. For further information,
see Daily safety checks on page 51.
Open the throttle and release it to verify that the throttle is operating
smoothly and returning to its resting position correctly. Make sure
you know how the throttle feels during normal operation. If you detect
any changes to how the throttle feels or notice that the throttle is
slower or sticking at any point, contact the Maeving Workshop Team,
a Maeving Workshop Partner or a qualified person or business
with an extensive technical knowledge of motorcycles. For further
information, see Contacts on page 6.
WARNING: Changes in throttle action may be due to wear,
dust or dirt and could lead to a sticking throttle. A sticking
throttle control could lead to loss of control and an accident,
causing injury or death.
WARNING: Always make sure that the ignition key is in the
OFF position and the motorcycle is stationary before checking
the throttle. Failure to adhere to these instructions could cause
the motorcycle to move unintentionally, potentially causing
damage to the motorcycle or property or personal injury.
WARNING: Failure to perform the daily safety checks before
you ride may result in serious motorcycle damage or an
accident, potentially causing serious injury or death and may
void the warranty.
WARNING: It is dangerous to ride a motorcycle with a
defective throttle. Doing so may lead to an accident, causing
injury or death.
To Next Page
Loading...
