Maeving | RM1S Owner’s Handbook
92
FUSES
Accessing the fuse box
WARNING: The electric motorcycle
components should only be serviced
by qualified personnel. Specialist
tools and personal protective
equipment are required for working
on any electric vehicle. Unqualified
personnel can potentially cause
serious personal injury or death.
NOTICE: The motorcycle must be
stationary to access the storage
compartment and fuse box.
To access the fuse box:
1. With the motorcycle stationary and the
ignition switched to the ON position,
select Neutral (N).
2. Press the compartment unlock
button once (short press). Storage
compartment on page 49.
3. Turn the ignition to the OFF position
4. Remove the 2 bolts (T30 Torx™) securing
the service panel and detach the panel.
Note: When refitting, tighten to
4 Nm.
Fuse identification
The motorcycle uses mini fuses.
Fuse No. Value Description
1 5A
Immobiliser and
accessory GPS tracker
2 5A
Diagnostic tool
connector
3 5A USB-C charger
4 5A Instruments
5 10A Ignition power
6 15A
Storage compartment
actuator
Spare fuses (in fuse box lid): 5A and 15A.
1
To Next Page
Loading...
