MAEVING RM1S 2024 - Safety Cut-Out; Moving off

Maeving | RM1S Owner’s Handbook
56
HOW TO RIDE THE MOTORCYCLE
Safety cut-out
Note: The motorcycle is equipped
with a safety cut-out switch, which
prevents a driving mode from being
selected whilst the side stand is in
the down (parked) position.
Note: The side stand must be in
the up position in order to engage a
driving mode.
WARNING: Never ride with the side
stand in the down position, as this
could lead to an accident, resulting in
injury or death.
Moving o
1. Whilst sitting astride the motorcycle, apply
the brakes to prevent the motorcycle from
rolling forward or backward.
2. Turn the ignition to the ON position and
make sure that the side stand is in the
fully up position.
CAUTION: Make sure to take
the motorcycle’s weight before
releasing the side stand to avoid
the motorcycle from becoming
unbalanced. An unstable motorcycle
may result in damage to the
motorcycle or injury.
WARNING: Do not ride the
motorcycle if the side stand is not
returning to the fully up position by
spring tension. Always make sure the
side stand is fully up before moving
o. An incorrectly operating side
stand could make contact with the
road surface and lead to an accident,
causing injury or death.
3. Select the driving mode.
WARNING: The motorcycle has a
side stand safety cut-out feature
that prevents a driving mode from
being selected while the side stand
is in the down position. The safety
cut-out feature prevents moving o
accidentally with the side stand in the
down position, which could lead to an
accident, causing injury or death.
4. Slowly release the brakes and gradually
open the throttle to move forward,
making sure you make smooth, gradual
increases in throttle opening and closing
to provide a safe ride and prevent loss
of control.
! ! !
! ! !
! ! !
! ! !
! ! !
! ! !