20 Programming Guide
User Programming
System Codes
*4 or 6 digits according to section [701] option [1]. When programming access codes with 4 digits, press the [ENTER] key after
entering the last digit. The control panel automatically removes the last 2 digits of the user access code if the length is changed from
6 digits to 4 digits. However, if the user access code length is changed from 4 to 6 digits, the control panel adds 2 digits to the end by
using the first two digits.
Maintenance Code Limited Access Table
User Code Options
Warning: When section [400] is accessed, the MG5000 will copy the saved value of that section to all user options.
The System Master, Master 1, and Master 2 user code options cannot be modified. However, if partitioning is not enabled, the user code
options for Master 2 will match those of Master 1.
Section Data Description
[395] ____/____/____(147 to lock, other to unlock) Installer Code Lock (default 000)
[397] ____/____/____/____/____/____ Installer Code (default = 000000)*
[398] ____/____/____/____/____/____ Maintenace Code (default = 111111)*
[399] ____/____/____/____/____/____ System Master Code (default = 123456)*
These are the sections that the Maintenance Code cannot access:
[395] Installer code lock [816] Monitoring station telephone number 2
[397] Installer code [817] Backup Monitoring station telephone
[398] Maintenance code [910] Panel ID
[815] Monitoring station telephone number 1 [911] PC password
User Options
1 - Partition 1 Access 5 - Force Arming (Regular/Sleep/StayArming)
2 - Partition 2 Access 6 - Arm Only
3 - Bypass Programming 7 - PGM Activation Only
4 - Stay/Sleep Arming 8 - Duress
Section Options Section Options
[400] = Default Option 1 2 3 4 5 6 7 8 [417] = User 17: 1 2 3 4 5 6 7 8
[401] = System Master: 1 2 3 4 5 6 7 8 [418] = User 18: 1 2 3 4 5 6 7 8
[402] = Master 1: 1 2 3 4 5 6 7 8 [419] = User 19: 1 2 3 4 5 6 7 8
[403] = Master 2: 1 2 3 4 5 6 7 8 [420] = User 20: 1 2 3 4 5 6 7 8
[404] = User 4: 1 2 3 4 5 6 7 8 [421] = User 21: 1 2 3 4 5 6 7 8
[405] = User 5: 1 2 3 4 5 6 7 8 [422] = User 22: 1 2 3 4 5 6 7 8
[406] = User 6: 1 2 3 4 5 6 7 8 [423] = User 23: 1 2 3 4 5 6 7 8
[407] = User 7: 1 2 3 4 5 6 7 8 [424] = User 24: 1 2 3 4 5 6 7 8
[408] = User 8: 1 2 3 4 5 6 7 8 [425] = User 25 1 2 3 4 5 6 7 8
[409] = User 9: 1 2 3 4 5 6 7 8 [426] = User 26: 1 2 3 4 5 6 7 8
[410] = User 10: 1 2 3 4 5 6 7 8 [427] = User 27: 1 2 3 4 5 6 7 8
[411] = User 11: 1 2 3 4 5 6 7 8 [428] = User 28: 1 2 3 4 5 6 7 8
[412] = User 12: 1 2 3 4 5 6 7 8 [429] = User 29: 1 2 3 4 5 6 7 8
[413] = User 13: 1 2 3 4 5 6 7 8 [430] = User 30: 1 2 3 4 5 6 7 8
[414] = User 14: 1 2 3 4 5 6 7 8 [431] = User 31: 1 2 3 4 5 6 7 8
[415] = User 15: 1 2 3 4 5 6 7 8 [432] = User 32: 1 2 3 4 5 6 7 8
[416] = User 16: 1 2 3 4 5 6 7 8