Magellan 23
Remote Control (RC) Serial Number
To delete a remote control, enter [000000] in its respective section.
To view the serial number display, refer to section [960].
System Programming
Section Remote Serial Number Section Remote Serial Number
[651] = RC 1 for User 1: ____/____/____/____/____/____ [667] = RC 17 for User 17: ____/____/____/____/____/____
[652] = RC 2 for User 2: ____/____/____/____/____/____ [668] = RC 18 for User 18: ____/____/____/____/____/____
[653] = RC 3 for User 3: ____/____/____/____/____/____ [669] = RC 19 for User 19: ____/____/____/____/____/____
[654] = RC 4 for User 4: ____/____/____/____/____/____ [670] = RC 20 for User 20: ____/____/____/____/____/____
[655] = RC 5 for User 5: ____/____/____/____/____/____ [671] = RC 21 for User 21: ____/____/____/____/____/____
[656] = RC 6 for User 6: ____/____/____/____/____/____ [672] = RC 22 for User 22: ____/____/____/____/____/____
[657] = RC 7 for User 7: ____/____/____/____/____/____ [673] = RC 23 for User 23: ____/____/____/____/____/____
[658] = RC 8 for User 8: ____/____/____/____/____/____ [674] = RC 24 for User 24: ____/____/____/____/____/____
[659] = RC 9 for User 9: ____/____/____/____/____/____ [675] = RC 25 for User 25: ____/____/____/____/____/____
[660] = RC 10 for User 10: ____/____/____/____/____/____ [676] = RC 26 for User 26: ____/____/____/____/____/____
[661] = RC 11 for User 11: ____/____/____/____/____/____ [677] = RC 27 for User 27: ____/____/____/____/____/____
[662] = RC 12 for User 12: ____/____/____/____/____/____ [678] = RC 28 for User 28: ____/____/____/____/____/____
[663] = RC 13 for User 13: ____/____/____/____/____/____ [679] = RC 29 for User 29: ____/____/____/____/____/____
[664] = RC 14 for User 14: ____/____/____/____/____/____ [680] = RC 30 for User 30: ____/____/____/____/____/____
[665] = RC 15 for User 15: ____/____/____/____/____/____ [681] = RC 31 for User 31: ____/____/____/____/____/____
[666] = RC 16 for User 16: ____/____/____/____/____/____ [682] = RC 32 for User 32: ____/____/____/____/____/____
[700] General System Options Bold = Default setting
Option OFF ON
[1]
Partitioning
N Disabled N Enabled
[2]
Battery charging (350mA or 700mA)
N 350mA N 700mA
[3]
Audible trouble warning (except AC failure)
N Disabled N Enabled
[4]
Audible trouble warning on AC failure
N Disabled N Enabled
[5]
RF interference detection
N Disabled N Enabled
[6]
Exit delay termination
N Disabled N Enabled
[7]
Tamper supervision on the bus module
N Disabled N Enabled
[8] N/A N/A N/A
[701] General Code Options Bold = Default setting
Option OFF ON
[1]
Access code length
N 6 digits N 4 digits
[2]
Lock master code
N Disabled N Enabled
[3]
Confidential mode
N Disabled N Enabled
[4]
To exit confidential mode
N Enter a code N Press a key
[5]
Confidential mode timer
N 2 minutes N 5 seconds
[6] to [8] N/A N/A N/A
To Next Page
Loading...
Need help?
General