EasyManuals Logo

Magic Mobility Frontier V6 User Manual

Magic Mobility Frontier V6
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Form 07A Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4
© Magic Mobility Page 20 of 65
5.5 Seat Tilt Option if fitted
To operate the seat tilt:
Bring your power chair to a complete stop on a flat level surface.
Always fasten the positioning belt when operating the seat tilt option.
Push the ‘Mode” button on the joystick. Select seat tilt by moving the joystick left or right. Once
the seat tilt option is highlighted, moving the joystick forward or backwards will operate the
function.
Once the seat reaches its highest tilt angle, the tilt action stops; release the joystick at this point.
Before driving, return the seat to its upright position. When returning to the upright position,
always be sure that the mechanism has reached its lowest limit or normal seated position.
WARNING! Never tilt the seat from its upright position on an inclined surface or on
bumpy or uneven surfaces. Never raise the seat tilt while your power chair is in
freewheel mode. Failure to heed this warning can result in the power chair tipping
over and causing personal injury.
CRITICAL! Do not put your fingers, toes or any objects into the tilt mechanism while
it is operating. Serious personal injury will occur.
5.6 Power elevating seat option if fitted
The power elevating seat will allow more freedom and independence by extending your level of
reach. The seat height can be adjusted to match a surface to which you are transferring.
The scissor action of the seat elevator may be a dangerous hazard. Under no circumstances should
you put your hands, fingers, toes or any part of your body in the seat elevator mechanism while it is
operating. Ensure that no one in the vicinity of the wheelchair has any part of their body in the seat
elevator mechanism while it is working.
To operate the power elevating seat:
Bring your power chair to a complete stop on a flat level surface.
Always fasten the positioning belt when operating the power elevating seat.
Push the ‘Accessory Mode Selection button on the joystick. Select power elevating seat by
moving the joystick left or right. Once the power elevating seat option is highlighted, moving the
joystick forward or backwards will operate the function.
Once the seat reaches its highest elevation, the action stops; release the joystick at this point.
Before driving, always be sure that the mechanism has returned the seat to its lowest position.
The power seat elevator is fitted with a system that reduces the speed of the power wheelchair
when the seat has been elevated approximately 2”/50mm.
WARNING! Fasten the positioning belt when using the seat elevator
WARNING! Never elevate the seat from its lowest position on an inclined surface
WARNING! Never raise the seat when crossing bumpy or uneven surfaces
WARNING! Do not put the power wheelchair into freewheel mode with the seat
elevated
WARNING! Maintain recommended tyre pressures for good stability
STOP! Do not put your fingers, toes or any other body part or object into the scissor
mechanism while it is operating. Serious personal injury will occur.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Magic Mobility Frontier V6 and is the answer not in the manual?

Magic Mobility Frontier V6 Specifications

General IconGeneral
BrandMagic Mobility
ModelFrontier V6
CategoryWheelchair
LanguageEnglish

Related product manuals