Magicfx ECO2JET - Page 24

24 MAGICFX
®
ECO2JET
®
- User and Installation Manual
4. Mount the ECO2JET
®
in a horizontal position only onto a horizontal truss.
6
CAUTION
Take the recoil of the ECO2JET
®
into account. Make sure
the construction is prepared for the counter force of
firing the eect.
5. Secure the ECO2JET
®
onto the truss with use of a safety wire on the bottom of
the ECO2JET
®
. Make sure the safety wire is as short as possible. If needed, wind
the cable around the truss to pull it tight.
6
CAUTION
The safety steel and the emergency link need to have
a minimal workload of 40 kg.