28
GRANT_DENY: Options for controlling access of host
computers and local control panels to operating, tuning,
and alarm parameters of the block.
INPUT_OPTIONS: Option bit string for handling the
status of the auxiliary inputs.
IN: The block input value and status.
IN_LO: Input of the low range transmitter, in a range
extension application.
IN–1, IN–2, IN–3: Inputs combined with the PV in a
section of four term math functions.
RANGE_HI: Constant value above which the range exten-
sion has switch to the high range transmitter.
RANGE_LO: Constant value below which the range exten-
sion has switch to the high range transmitter.
BIAS_IN_1: The bias value for IN_1.
GAIN_IN_1: The proportional gain (multiplier) value for
IN_1.
BIAS_IN_2: The bias value for IN_2.
GAIN_IN_2: The proportional gain (multiplier) value for
IN_2.
BIAS_IN_3: The bias value for IN_3.
GAIN_IN_3: The proportional gain (multiplier) value for
IN_3.
COMP_HI_LIM: Determines the high limit of the com-
pensation input.
COMP_LO_LIM: Determines the low limit of the com-
pensation input.
ARITH_TYPE: The set of 9 arithmetic functions applied
as compensation to or augmentation of the range extended
input.
BAL_TIME: Specifies the time for a block value to match
an input, output, or calculated value or the time for dissipa-
tion of the internal balancing bias.
BIAS: The bias value is used to calculate the output.
GAIN: The gain value is used to calculate the output.
OUT_HI_LIM: The maximum output value allowed.
OUT_LO_LIM: The minimum output value allowed.
UPDATE_EVT: This alert is generated by any changes to
the static data.
BLOCK_ALM: Used for all configuration, hardware, con-
nection failure, or system problem in the block.
BE57-646 ECLIPSE Guided Wave Radar Transmitter - FOUNDATION fieldbus
™
To Next Page
Loading...
