39
60 Series 2WD/4WD, Model - 8560
Controls
Opening the Hood
The hood is hinged at the front side and opens away from
the operator as follows,
1. Pull the knob (A). The hood will unlock.
2. Lift the hood upwards by hand. A gas spring (C)
provided inside will assist in minimising the effort for
lifting.
3. Pull the stay rod (B) out of hood assembly and lock it
in the slot (D) or (E) as indicated.
Closing the Hood
1. Ensure that side panels are properly locked.
2. Fold the stay rod and lock it in the hood.
3. Press the hood downwards till it gets locked.
B
A
C
D
E
To Next Page
Loading...
