Maipu MP7500 - RM7 B-8 E1 H Jumper Setting; RM7 B-8 E1 H Interface Board Attributes

MP7500 Router Installation Manual Version 1.0
RM7B-8E1H Jumper Setting
RM7B-8E1H provides internal jumper setting for interface grounding. The
jumpers are located after DB40 pin connector and each port corresponds
with a jumper.
Jumping mode:
RxShield direct grounding
RxShield grounding through capacitance
RM7B-8E1H Interface Board Attributes
RM7B-8E1H interface attributes:
Attributes Description
Interface type DB40
DB40<——>8×BNC
Number of
interfaces
8
Interface
standard
G.703
Supported
protocol
·PPP
·HDLC
·frame-relay
·virtualethernet
Maipu Confidential & Proprietary Information Page 30 of 62