7.2.General Specifications
Clamp Jaw Opening 33mm approx.
Display 3-5/6 digits (6000 counts) TFT Color LCD
Continuity Check Threshold 50Ω; Test current < 0.5mA.
Diode Test Test current of 0.3mA typical;
Open circuit voltage < 3.3VDC typical.
Over-Range Indication “OL” display
Measurement Rate 3 readings per second, nominal
Peak Captures peaks >1ms
Temperature Sensor Type K thermocouple
Input Impedance 10M VDC and 9M VAC
AC Response True RMS (AAC and VAC)
Operating Temperature 5 to 40°C (41 to 104°F)
Storage Temperature -20 to 60°C (-4 to 140°F)
Operating Humidity Max 80% up to 31°C decreasing linearly to
50% at 40°C
Storage Humidity <80%
Operating Altitude 2000 meters maximum.
Battery Three (3) x 1.5V AAA battery
Auto Power Off After approx. 15-60 minutes.
Dimensions 250 x 78 x 40mm
Weight 350g
Safety For indoor use and in accordance with the
requirements for double insulation to
IEC1010-1 (2001): EN61010-1 (2001)
Overvoltage Category III 1000V and Category
IV 600V, Pollution Degree 2.
23
To Next Page
Loading...
