12
EN
Time/Date
The Time/Date can be automatically set once it has been connected to the Internet, DAB or FM radio
station with time/date information. You may also adjust the Time/Date manually.
Press CLOCK button on remote control to access Set Time/Date menu to adjust Time/Date,
Alternatively,
- While in System settings mode, press
12
w
/
s
3
buttons to select Time/Date. Press the SELECT
button to conrm. Press
12
w
/
s
3
buttons to select Set Time/Date and press the SELECT button
to conrm.
1. The date digits will ash on the display.
2. Press
12
w
/
s
3
buttons to adjust the day, then press the SELECT button to conrm.
3. Repeat above Step (2) to set the Month/Year/Hour/Minute.
4. The date and time settings are now set.
For the other settings under Time/Date, press
12
w
/
s
3
buttons to select from the following options
and then press the SELECT button to conrm.
Auto update DAB/FM/Network/No update
Set format 12 / 24 hour format.
Set timezone Select a time zone. (Only available when Auto update from Network is on.)
Daylight savings Select daylight savings. (Only available when Auto update from Network is
on.)
The default auto time update setting is “Update from Network”. If you would like to manually
set the time, it is recommended to turn the Auto update function o.
Inactive Standby
Use the Inactive Standby to turn o the unit after a certain time in play mode.
1. While in System settings mode, press
12
w
/
s
3
buttons to select Inactive Standby and press
SELECT button to conrm.
2. Press
12
w
/
s
3
buttons to select between O, 2 hours, 4 hours, 5 hours and 6 hours. Press
SELECT button to conrm.
Language
1. While in System settings mode, press
12
w
/
s
3
buttons to select Language and then press the
SELECT button to conrm.
2. Press
12
w
/
s
3
buttons to change the display language of your choice.
3. Press the SELECT button to conrm.
Instructions Guide