MAJORITY Fitzwilliam 3 - Connecting using the WPS button on your router; Connecting using your wireless network password

11
EN
Press BACK button to exit and then press
7
/
8
buttons to select [YES]. Press SELECT button to
conrm. The Display will show Equaliser Saved.
My EQ p rofile setup
Bass: 0
Treble: 0
Bass
-14+ 140
0 dB
Bass
Network
1. While in System settings mode, press
12 w
/
s 3
buttons to select Network. Press the SELECT
button to conrm.
2. Press
12 w
/
s 3
buttons to select from the following settings, then press the SELECT button to
conrm.
Network wizard SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual cong – select wireless network with DHCP enable/disable.
PBC Wlan setup Select WPS on the unit and press the WPS button on the modem device
that you wish to connect with. Press SCROLL/SELECT dial on unit or
SELECT button on remote control to continue.
View settings Display the settings on the unit.
Manual settings Select wireless network with DHCP enable/disable.
NetRemote
PIN Setup
To dene a PIN number to be entered before being able to connect to the
unit remotely over a network
Network prole View the connected network.
Clear network
settings
To delete the connected network memory in Network prole.
Keep network
connected
To dene whether remains connected to its network in Standby mode and
when not in Network radio mode.
3. Press the BACK button on the unit or remote control to cancel the setting and return back to the
previous menu.
Instructions Guide