LEVELUPS SERIES 10-20 KVA PRODUCT DESCRIPTION
AG-SD-83 / Publication Date: 15.09.2014 / Rev. No: 0 / Rev. Date:
Battery install date
Use this menu to set the battery install date,
only when new batteries are installed.
Auto restart
In battery mode, the device turns off
at the end of battery discharge. Auto-restart
can be used to restart the UPS automatically
when the mains are restored.
Turn on auto-restart and set the time to
define when the device will be started after
the normal values of the mains are restored.
Battery self test
This function can be turned on to start
the user independent battery tests.
Set the time interval for the next test.
Note: Battery self test is the equivalent
of battery quick test.
Screen
Change the screen contrast to make it
more visible on different environmental
conditions.
To Next Page
Loading...
