LEVELUPS SERIES 10-20 KVA PRODUCT DESCRIPTION
AG-SD-83 / Publication Date: 15.09.2014 / Rev. No: 0 / Rev. Date:
The UPS device shipment must be done on pallets.
The 10-20kVA UPS are delivered on the pallet sized 87x55x140 mm (WxDxH). The height of
device together with pallet is approximately 200mm. The pallet measurements are given
below..
Cabinet is equipped with four-wheel. In this way, it can be placed by moving easily. These wheels
are to be used on smooth surfaces only.
The front wheels of UPS must be locked after positioning properly. The rear side wheels are
fixed.
Be more careful of sudden movements, especially when batteries are inside of cabinet.
Move the UPS as rarely as possible
To Next Page
Loading...
