EasyManua.ls Logo

Malvern Instruments Mastersizer X - Introduction; Site Requirements

Default Icon
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
This chapter covers health and safety guidelines that should ensure the safe
installation, operation and maintenance of the Accessory. You should read this
chapter in conjunction with the Health and Safety manual for your system.
#
Warning
Site requirements
The Mastersizer and its accessories have specific site requirements that must be
enforced to ensure the safe operation of the instrument. Information on site
requirements can be found in section A of the Mastersizer Installation Guide for
your system.
For information on the space required by your Accessory, refer to chapter 3 of
this manual.
#
Warning
Failure to follow these guidelines, particularly when making a measurement,
could result in the emission of laser radiation. Laser radiation can be harmful to
the body and can cause permanent eye damage.
If the System and Accessory is used in an environment not conforming to the site
requirements, safety may be compromised.
CHAPTER 2
QS SMALL VOLUME SAMPLE DISPERSION UNIT
Page 2.1

Table of Contents

Related product manuals