.
Lift the Dispersion Unit out of the carton and place on a suitable work-
bench. Always lift the Dispersion Unit supporting the base. Place the Dis-
persion Unit upright on its feet.
.
Remove the polythene wrap from the Dispersion Unit.
.
Remove the sample tubing wound around the Dispersion Unit.
.
Locate the wrapped tank cover positioned in the tank and remove the poly-
thene wrap.
.
Remove the Controller Unit from the carton and unwrap the polythene.
Empty the contents of the padded bag.
.
Remove all other packages from the carton. This may include a flow cell
and window tool.
.
If you have ordered a flow cell and window tool, carefully remove the bub-
ble wrap.
.
Retain all packaging in case the Dispersion Unit requires transporting in
the future.
Checking the contents
Now you have unpacked your Dispersion Unit, check the contents as follows:
Small Volume Sample Dispersion Unit
INSTRUMENTS
Small Volume Sample Dispersion Unit
INSTRUMENTS
Dis
p
e
r
s
io
nUn
i
tC
o
n
trolle
r
Stirrer
Sp
e
e
d
R
P
M
INSTRUMENTS
Dis
p
e
r
s
io
nUn
i
tC
o
n
trolle
r
Stirrer
Sp
e
e
d
R
P
M
INSTRUMENTS
INSTRUMENTS
6
3
4
7
8
10
9
1
5
2
11
ILL 3038
CHAPTER 3
QS SMALL VOLUME SAMPLE DISPERSION UNIT
Page 3.3
To Next Page
Loading...
