Where to find information
As stated above, this manual is designed to give a brief overview of what the
Accessory can do and how it is used in association with the system. In other
words it is a quick guide that allows you to understand how the Accessory
operates and runs you through how the Accessory is used when making a
measurement, hopefully steering you around the main pitfalls and directing you
to more information if needed.
The following is a list of the contents and objectives of the chapters within this
manual.
Chapter 2 - Health and Safety
This chapter covers health and safety guidelines that should ensure the safe
installation, operation and maintenance of the Accessory. You should read this
chapter in conjunction with the Health and Safety manual for your Mastersizer
system.
You are provided with information on:
.
Laser safety.
.
Electrical safety.
.
Sample handling.
.
Moving the Accessory.
.
Disposing of the Accessory.
Chapter 3 - Installation
This chapter provides you with all information required to install the Accessory
and includes information on:
.
Positioning the Accessory.
.
Unpacking the Accessory.
.
Checking the contents.
.
Connecting the Accessory.
.
Powering up the Accessory.
Chapter 4 - Getting to know your Accessory
This chapter is designed to enable you to identify the physical features of the
Accessory and is divided into two parts.
CHAPTER 1
QS SMALL VOLUME SAMPLE DISPERSION UNIT
Page 1.3
To Next Page
Loading...
