EasyManua.ls Logo

Mamiya ZD Back - Specifications

Mamiya ZD Back
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
104
Camera Type : AF single-lens reflex digital camera
Compatible Cameras : Mamiya 645AFD/645AFD II/RZ67PRO IID (The Digital Back Adapter
HX701 (sold separately) is required with the RZ67PROIID)
Image sensor : 48mm x 36mm full-frame-transfer dimetric RGB CCD
Aspect ratio : 4:3
Total Pixels : Approximately 21.7 mega pixels
Effective pixels : Approximately 21.3 mega pixels
Card Slot :Twin-Slot, Slot #1: SD Card, Slot #2: CF Card (Type I/II) (256MB or
more)
ISO sensitivity : ISO 50 to 400 (1/3 steps)
Recording format :RAW/JPEG (Exif 2.2 compliant), simultaneous RAW & JPEG
Image quality mode : JPEG: L (5,328 x 4,000 pixels), M (4,096 x 3,072 pixels), S (3,008 x
2,256 pixels)
File size :RAW: 35 MB (5,328 x 4,000 pixels) without compression
JPEG L: Fine approximately 10MB, L: Normal approximately 5MB,
L: Basic approximately 2.5MB
JPEG M: Fine approximately 6MB, M: Normal approximately 3MB,
M: Basic approximately 1.5MB
JPEG S: Fine approximately 3MB, S: Normal approximately 1.5MB,
S: Basic approximately 0.8MB
* File sizes may differ depending on ISO sensitivity and subject.
Shooting speed : 1.2 frames/second, 10-frame continuous burst possible
(when attached to the 645AFD II)
Color space : sRGB /Adobe RGB
White balance: Auto : Daylight/Overcast/Shade/Light bulb/Fluorescent/Flash (all of these
six can be finely adjusted)
Preset 1/Preset 2/Color Temperature (can be set in units of 100K
between 2,800K and 10,000K)
LCD monitor : 1.8 inch low-temperature polysilicon TFT (thin-film transfer)
LCD, Field of view = 100%, luminance adjustable, with white
LED back light
Playback function : Zoom, slideshow, histogram, highlight alert, shadow alert
Erase function : Frame (selected image,) all images, card formatting
Language : Japanese/English/German/French/Spanish (total of five languages)
Video Output : Switching between NTSC and PAL
External I/F : IEEE1394 4-pin
Filter : IR Cut Filter included (can be used to replace the low-pass filter
YC401 for Mamiya ZD Back, sold separately)
Specifications
10_ZD back_E_p095-106 07/3/9, 20:45104

Table of Contents

Related product manuals